Posts Tagged ‘Replacement’

Check Out Red, Yellow, & Blue Replacement Main Rotors for Mini Infrared RC Helicopters (1 of each, 3 total)

August 5th, 2010

Red, Yellow, & Blue Replacement Main Rotors for Mini Infrared RC Helicopters (1 of each, 3 total) Review


We have the Havoc Heli Laser Battle helicopters, and these rotors are the right size and fit for them. I followed the other reviewers’ recommendations and soaked the old rotor in hot water before trying to pull it off with needle nose pliers. Then, when putting the new rotor on I applied super glue to the shaft to keep it from slipping. It works just as well as when it was new.

Red, Yellow, & Blue Replacement Main Rotors for Mini Infrared RC Helicopters (1 of each, 3 total) Feature

  • Fits air hogs havoc heli, stingers, spinmaster, picooz, and brandmates
  • Rotor blades have a cool new transparent design
  • Upgrade the look of your mini r/c helicopters
  • Make your havoc heli stand out from the rest

Red, Yellow, & Blue Replacement Main Rotors for Mini Infrared RC Helicopters (1 of each, 3 total) Overview

Get one of each color of replacement main rotor blades for the Mini Heli Infrared Indoor Helicopter, Mini Lama IR Heli, Bell Heli IR Indoor RC Helicopter, Picco Z, Havoc Heli and clones. This kit includes one Red , one Yellow , and one Blue main rotor blade. Each includes the top stabilizer rotor. These colored rotors will add color and style to your helicopter, making it unique. Also available in Black. Each heli requires 1 set. Main Rotor Blade Specifications (Each set): Rotor Diameter: 5.2″ (13.2cm) Material: Flexible Red/Yellow/Blue plastic Features: Integrated stabilizer (top hinged portion) This Main Rotor Blade Is Compatible With: Mini IR Helis, Mini Lama IR Heli & Mini Bell IR Heli, Spin Master Air Hogs Havoc Helis, Silverlit Picco Z, Clones like PiccoZ, PicooZ, etc…

Available at Amazon Check Price Now!

Related Products

Customer Reviews

Rotors arrived broken :( – Herbalist – Ohio
Did not get to play with the new rotors. They arrived broken :(
The packaging was way to thin for the fragile blades and the shafts broke.
Too sad—we enjoy the helicoptor –the rotors just break easily.

main rotor blades – Aleshia E. Swope – cinci, oh
Unlike the other review, my blades went on easy and worked as good as the factory blades on my air hog havoc heli.

Absolutely Terrible. – Michael A. Junker – Elkton, SD USA
This item was terrible! When I bought it, I carefully read over the description and anything else, and this was after I had been searching for a couple of days. When I attempted to switch the rotors, it destroyed my Havoc Heli, which it is said to be compatible with! I fully regret this purchase and advise all others to avoid this product!
*** Product Information and Prices Stored: Aug 05, 2010 18:22:11

Holloway Sportswear

Check Out Two (2) Replacement Blue Main Rotors for Mini Infrared Remote Control Electric Helicopters

May 18th, 2010

Two (2) Replacement Blue Main Rotors for Mini Infrared Remote Control Electric Helicopters Review

Two (2) Replacement Blue Main Rotors for Mini Infrared Remote Control Electric Helicopters Feature

  • Fits air hogs havoc heli, stingers, spinmaster, picooz, and brandmates
  • Rotor blades have a cool new transparent design
  • Upgrade the look of your mini r/c helicopters
  • Make your havoc heli stand out from the rest

Two (2) Replacement Blue Main Rotors for Mini Infrared Remote Control Electric Helicopters Overview

Buy a set of 2 replacement Blue main drive rotor blades for the Mini Heli Infrared Indoor Helicopter, Mini Lama IR Heli, Bell Heli IR Indoor RC Helicopter, Picco Z, Havoc Heli and clones. This kit of two replacement Blue main rotor blades gives you two spare rotors blade sets. Each includes the top stabilizer rotor. These Blue rotors will add color and style to your helicopter, making it unique. Also available in Yellow, Red, and Black. Each heli requires 1 set. Main Rotor Blade Specifications (Each set): Rotor Diameter: 5.2″ (13.2cm) Material: Flexible Blue plastic Features: Integrated stabilizer (top hinged portion) This Main Rotor Blade Is Compatible With: Mini IR Helis, Mini Lama IR Heli & Mini Bell IR Heli, Spin Master Air Hogs Havoc Helis, Silverlit Picco Z, Clones like PiccoZ, PicooZ, etc…

Available at Amazon Check Price Now!

Related Products

Customer Reviews

*** Product Information and Prices Stored: May 18, 2010 05:46:09

Siam Fishing

Check Out Replacement Tail Motor for Mini Infrared Remote Control Electric Helicopters

March 11th, 2010

Replacement Tail Motor for Mini Infrared Remote Control Electric Helicopters Review


These motors are better than a thousand pinecones combined! You’ll need a soldering kit to get it wired up correctly. Pay attention to which motor leads go to which wires. The wires in the tail have a slightly different color because one has a thin insulation which must be burned off before soldering. There are good tutorials on doing this online. Don’t go it alone.

But yeah, the motor itself is way better than ten or 7 magical donkeys.

Replacement Tail Motor for Mini Infrared Remote Control Electric Helicopters Feature

  • Fits air hogs havoc heli, picooz, and other 9g micro infrared helis
  • Can also be used in other RC hobby projects
  • Soldering skills required to install

Replacement Tail Motor for Mini Infrared Remote Control Electric Helicopters Overview

This is a replacement tail motor for the Mini Heli Infrared Indoor Helicopter, Bell Heli IR Indoor RC Helicopter, Picco Z, Havoc Heli and other 9g infrared helis. The tail motor will last for hundreds of flights, but if it does wear out you can use this replacement part to restore your helicopter to top condition. Tail Motor Specifications: * Operating Voltage: 3.7V * Diameter: 4.0mm * Length: 12.0mm * Output Shaft Diameter: 0.7mm This Replacement Tail Motor Is Compatible With: * Mini IR Helis & Mini Bell IR Heli, * Spin Master Air Hogs Havoc Helis, * Silverlit Picco Z, * Clones like PiccoZ, PicooZ, etc… Note: Requires removal of old tail motor soldering when replacing the tail motor

Available at Amazon Check Price Now!

Related Products

Customer Reviews

*** Product Information and Prices Stored: Mar 11, 2010 19:45:08

delonte west nba Freshwater fishing Shopping-SportingGoods

Customize Your Radio Control Car with a New Aftermarket Replacement Body

November 27th, 2009

One of the greatest successes of the radio control car hobby is the ability to customize your vehicle to your individual taste. Adding a different style body with a unique color scheme is certainly the most dramatic cosmetic change a car owner to his RC car or truck. Many owners have converted their RC cars and trucks to their "real" daily driver, race cars are similar, truck pull, vintage cars or even theirFavorite Nascar.

Change A body can be both affordable and easy with the easy availability of replacement equipment, which can be performed either at your local hobby shop or online. The most popular places are molded in Lexan and are easily painted the colors of your choice from the interior of the body. This allows the Lexan act as a protective clear coat to ensure security caused by your imagination paint scrapes, scratches and chips by the inevitable breakdowns. You canBuy cool stickers to add custom graphics or even make your car look like Dale Earnhart Jr's # 8 or Tony Stewart's # 20! Your imagination knows no boundaries.

Every hobby shop or craft store will be up for sale a selection of aerosol paints offer for you to choose from. I've also noticed that the "base coat" color is left of our business chassis works very well. With these automotive paints gives us the opportunity to every conceivable color, or a wild mix perfectlyexisting real vehicle. However, these colors will require access to spray equipment, such as an airbrush or a small "touch up" have gun and a compressor. Note: Always wear an approved respirator and only spray paint in a well ventilated area away from ignition sources. Paint fumes are highly flammable and toxic!

Most of the better replacement bodies are packed with paint masks for the windows, but you want to have some tape on hand for the striping or TutoneJobs. The new body must be trimmed, so you need Lexan scissors or an exacto knife. A drill is required to make mounting holes and a jig saw is very useful for your cooling holes for nitro powered RC cars. A piece of fine sandpaper should be used to smooth out all freshly cut edges. Yes, you can lexan be sharp. Please be careful when these potentially dangerous tools! Get instruction on their correct and safe use, if you are inexperienced. Bleeding on your RC car is not acool way to adjust to it!

A little creativity and effort are you with a truly unique RC car or truck, your friends and awe offer a super hobby experience will be rewarded. Enjoy!

Siam Fishing delonte west nba